Section 2
2-1
Model 0736
To the Operator
2
To the Operator
Operator Information
The Model 0736 soft serve freezer has been carefully
engineered and manufactured to give you dependable
operation.
This machine is suitable for food mixtures heat treatment,
storage and batch, according to use allowed by law.
This machine, when properly operated and cared for, will
produce a consistent quality product. Like all mechanical
products, it will require cleaning and maintenance. A
minimum amount of care and attention is necessary if the
operating procedures outlined in this manual are followed
closely.
IMPORTANT!
This manual should be read
before operating or performing any maintenance on your
machine.
The Model 0736 will
not
eventually compensate and
correct for any errors during the setup or filling
operations. Thus, the initial assembly and priming
procedures are of extreme importance. It is strongly
recommended that personnel responsible for the
machine's operation, both assembly and disassembly, go
through these procedures together in order to be properly
trained and to prevent misunderstandings.
In the event you should require technical assistance,
please contact your local authorized Taylor Distributor.
Note:
Your Taylor warranty is valid only if the parts are
authorized Taylor parts purchased from the local
authorized Taylor distributor, and only if all required
service work is provided by a Taylor service technician.
Taylor reserves the right to deny warranty claims on
machines or parts if unapproved parts or incorrect
refrigerant were installed in the machine, system
modifications were performed beyond factory
recommendations, or it is determined that the failure was
caused by abuse, misuse, neglect, or failure to follow all
operating instructions. For full details of your Taylor
warranty, please see Limited Warranty on Machines on
page 10-1 and Limited Warranty on Parts on page 11-1.
Note:
Constant research results in steady
improvements; therefore, information in this manual is
subject to change without notice
IMPORTANT!
If the crossed-out waste
container symbol is affixed to this product, it signifies that
this product is compliant with the EU Directive as well as
other similar legislation in effect after August 13, 2005.
Therefore, it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
The user is responsible for delivering the product to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.
Working Limits
Do not
use the machine with inconstant power supplies
or +/- 10% beyond the value indicated on the plate or
with the power cable damaged;
Do not
use the machine in explosive atmospheres;
Do not
wash the machine with high-pressure water jets
or with harmful substances;
Do not
expose the machine to excessive heat or
humidity.
Do not
use unbalanced mixtures and/or amounts which
do not comply with the specifications carried on the
packs.
Usage not expressly indicated in this manual is to be
considered improper and therefore must be strictly
avoided.
The manufacturer will not be held liable for direct or
indirect harm to persons or animals or damage to objects
caused by improper use of the machine.
Summary of Contents for 0736
