OPERATING PROCEDURES
6-13
Model 736
Operating Procedures
6
Hopper Agitation Adjustment in Auto Mode
1. With the machine filled with
fresh
mix, press the Auto
button to start the freezing cycle.
2. Press the Auto and Option buttons simultaneously for
a few seconds until the adjustment menu appears on
the display.
Figure 6-40
3. The first menu item allows you to adjust the
consistency of the product. Press the OK button to
confirm the displayed value and switch to the next
entry.
4. Subsequent parameters allow the operator to change
the operating times (MIXING ON) and pause
(MIXING OFF) of the hopper agitator motor during
the Auto mode.
Figure 6-41
5. Press the Up Arrow button to increase the time;
press the Down Arrow button to decrease the time.
6. Press OK button to confirm the new selected values.
Press C button to erase the new values.
Hopper Temperature Adjustment in Standby
Mode
1. With the machine filled with a
fresh
mix, press the
Standby button.
2. Press the Standby and Option buttons
simultaneously for a few seconds until the
adjustment menu appears on the display.
Figure 6-42
3. The first menu item allows the operator to change the
temperature of the mix in the hopper during the
Standby mode between 32°F (0°C) and 41°F (5°C).
Figure 6-43
4. Press the Up Arrow button to increase the
temperature; press the Down Arrow button to
decrease the temperature.
5. Press OK button to confirm the new selected value.
Press C button to erase the new value.
6. Press the OK button to confirm the other menu items
and exit the menu by saving the changes.
Summary of Contents for 0736
