16
Model 161
Operating Procedures
Step 9
Slide the two o- rings into the grooves on the remaining
draw valves and lubricate.
Figure 17
Step 10
Lubricate the inside of the freezer door spouts from the
bottom
. Insert the draw valves into the freezer door
from the
bottom
until the slot in the draw valves comes
into view.
Figure 18
Step 11
Slide the o- ring onto each pivot pin and lubricate.
Figure 19
Step 12
Slide the tip of the draw handle into the slot of the draw
valve, starting from the right. Slide the short pivot pin
through the far right draw handle. Slide the long pivot
pin through the far left and middle draw handles.
Figure 20
