Thank you for purchasing the Taylor® Digital Wireless Weather Station
with Wind Speed Sensor. This state-of-the art measurement instrument is
engineered and designed to meet the highest quality standards…to
assure you uncompromising accuracy and consistently dependable,
convenient performance. This instrument will provide measurements of
wind speed & direction, wind chill, heat index, temperature & humidity.
This manual will describe how to set up and operate your Wireless
Weather System. In order to optimize the unit's function, please read this
instruction manual carefully before use…and keep it handy for future
reference.
Items included in
this
package
:
1.
Home Receiver Unit (an indoor unit which displays temperature and
other readings)
2.
Remote Wind Gauge Sensor (an outdoor sensor unit which
transmits wind, temperature & humidity data to the receiver unit)
3.
Mounting hardware for the Wind Gauge Sensor (2 “U”-shaped
metal plates, 4 sets of Hex screws & nuts).
4.
Instruction manual
Additional items needed for installation (not included):
1.
A 1” to 1 ¼” diameter MAST and hardware
2.
A small Phillips screwdriver (
for the battery compartments and wind
vane screws
)
3.
A total of 4 AA batteries (
Lithium batteries are recommended,
especially for the outdoor Wind Gauge Sensor, as lithium batteries
will last longer and thus will not need to be replaced as often as
alkaline batteries
)
1. Items and materials needed for installation and set up
2. How to assemble the remote Wind Gauge Sensor
3. How to install the home receiver unit batteries
4. How to select and test a location for the remote Wind Gauge Sensor
5. How to mount the Wind Gauge Sensor
6. How to install the batteries and calibrate the Wind Gauge Sensor
7. How to use and read the data on the home receiver unit
This manual includes information about:
Items Required for Installation and Set Up
2
