Model 3885
Digital Kitchen Scale
Instruction Manual
Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor® scale is an example of
superior design and craftsmanship. Please read this instruction manual carefully before use.
Keep these instructions handy for future reference.
Battery Installation
1. Use 2 AAA batteries (included. Remove any plastic wrap from the batteries before
proceeding). Always replace all batteries at the same time; do not combine old and new
batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.)
batteries. Do not dispose of batteries in fire,
as batteries may explode or leak.
Remove the
batteries if the scale will not be used for a long period of time.
2. Remove the battery compartment cover on the bottom of the scale.
3. Place the batteries into the battery compartments according to the “+” and “-” polarity symbols
in the battery compartment.
4. Replace the battery compartment cover.
NOTE:
Please recycle or dispose of batteries per local regulations.
WARNING:
Batteries may pose a choking hazard. As with all small items, do not let children
handle batteries. If swallowed, seek medical attention immediately.
PRECAUTION:
Do not dispose of batteries in fire. Batteries may explode or leak. Remove the
batteries if the scale will not be used for a long period of time.
Low Battery
Your Taylor® scale is equipped with a low battery indicator. A low battery symbol will appear in
the upper left corner of the LCD screen or readings will grow dim or become irregular if the
batteries need replacement.
General Weighing Operation
1.
Place the scale on a hard, level surface.
2.
Press the “
TARE/
” button to turn the scale on. The display will show “
8888
” and then zero
when it is ready for use. If the display does not show z
ero, press the “
TARE/
” button and wait
a few seconds. The scale will reset (tare) to zero.
3.
Your scale weighs in ounces (oz), pounds/ounces (lb oz), grams (g) and kilograms (kg).
Press the “
UNIT
” button to change the units of measurement.
4.
Place the item to be weighed on the center of the platform. The weight will display. As you
add weight, the weight displayed increases.
5.
The scale will turn off automatically after approximately 1 minute of non-use or if there is no
change in weight after approximately 3 minutes. Press and hold the
“
TARE/
” button to turn the
scale off manually.
This document hosted by: www.oldwillknottscales.com
