Section 2
2-1
Model 632
To the Operator
2
To the Operator
The freezer you have purchased has been carefully
engineered and manufactured to give you dependable
operation. The Taylor Model 632, when properly operated
and cared for, produces a consistent quality product. Like
all mechanical products, this machine requires cleaning
and maintenance. A minimum amount of care and
attention is necessary if the operating procedures
outlined in this manual are followed.
IMPORTANT! This manual should be read
before operating or performing any maintenance on your
machine.
Your Taylor freezer will NOT eventually compensate for
or correct any errors that occur during the set-up or filling
operations. Thus, the initial assembly and priming
procedures are of extreme importance. It is strongly
recommended that personnel responsible for the
equipment’s operation, assembly, and disassembly, go
through these procedures together in order to be properly
trained and to make sure that no confusion exists.
If you require technical assistance, please contact your
local authorized Taylor distributor.
Note:
Your Taylor warranty is valid only if the parts are
authorized Taylor parts, purchased from the local
authorized Taylor distributor, and only if all required
service work is provided by an authorized Taylor service
technician.Taylor reserves the right to deny warranty
claims on machines or parts if parts not approved by
Taylor or incorrect refrigerant were installed in the
machine, system modifications were performed beyond
factory recommendations, or it is determined that the
failure was caused by abuse, misuse, neglect, or failure
to follow all operating instructions. For full details of your
Taylor Warranty, please see the Limited Warranty section
in this manual.
IMPORTANT! If the crossed-out waste
container symbol is affixed to this product, it signifies that
this product is compliant with the EU Directive as well as
other similar legislation in effect after August 13, 2005.
Therefore, it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
The user is responsible for delivering the product to the
appropriate collection facility, as specified by your local
code.
Note:
Constant research results in steady
improvements; therefore, information in this manual is
subject to change without notice.
All manuals and user guides at all-guides.com
