Taylor 7222F, Instruction Manual And Warranty Information

9

8

To ensure accuracy, use these tips to get the most 

accurate and consistent readings from your scale:

• Place the scale on a flat, hard floor surface. Carpeted 

or uneven floors may affect accuracy. If you 

experience any difficulty, move the scale to a different, 

hard flat surface and try again.

• You must have bare feet for estimation results. 

Remove your shoes and socks before proceeding. 

Clean, slightly moist feet will provide the best results.  

Position your feet for maximum contact with the metal 

electrodes on the platform.

• Balance your weight evenly between both feet and 

stand still while on the scale.

• Weigh yourself at the same time each day to see 

consistent trends. Your weight and other measures will 

naturally vary during the course of the day.

• IMPORTANT: The scale needs to be initialized after 

battery installation or if it is moved or bumped. At all 

other times, you may step directly on the scale for 

a reading.  To initialize the scale, simply press firmly 

on the scale platform. The display will turn on and 

automatically turn off. Your scale is now ready for use.

MEASUREMENT PROCEDURES WITH BLUETOOTH®

PRECAUTION !

The scale must be 

started up after each 

battery insertion/ 

replacement of 

battery or each time it 

is moved or bumped.

PRECAUTION !

Do Not step on scale 
unevenly (X)

To avoid injury, do not 

step with wet feet or on 

the edge of the platform.

TO TAKE A MEASUREMENT:

1.

 If your user information is already in the scale, then 

simply step on the scale to turn it on.    

OR

 Press “

SET

” to turn the scale manually on and to 

select the user number that you paired with your 

personal device. 

2.

 When the scale shows zero, step on the scale with 

bare feet, positioning your feet evenly on the scale 

platform with maximum contact with the metal 

electrodes.

3.

 Stand still while the scale measures your weight. The 

display counts up to your weight and will flash twice 

when the weight is locked. Your weight is displayed. 

4.

 Continue to stand still on the scale. A moving zeros 

pattern shows while the scale estimates your body 

composition.

5.

 Your body fat % (FAT), total body water % (TBW), 

muscle mass (MUS), Cal-Max™ estimate (CAL), 

and the difference between your current and 

goal weights are automatically transmitted to your 

personal device. 

MEASURING USING AUTO RECOGNITION FEATURE

After you have saved your personal profile data into a memory number and 

weighed yourself once, the scale will automatically recognize you for future weigh-

ins. It does this based upon the weight of the user (it will detect all profiles /- 

4.4 lbs / 2 kgs):

1. 

When you step the platform if there is only one user whose last weight data is 

close to the current one, the memory number will be selected automatically. 

When estimates are completed, the results appear on your personal device.

2.

 If two or more users are in a similar weight range (/- 4.4 lbs / 2 kgs), the 

scale will notify you to choose between, for example, P1 and P2.  Press “▲” or “▼” 

to get to the correct number and select the user by pressing ‘

SET

’.  If the scale 

cannot identify the user’s memory number, it will only display the weight. See 

“Problem Solving” section.

Note: You need to save your personal data in a user number before using the 

automatic user identification measuring method, or the function will fail.

DATA TRANSMISSION FROM SMART SCALE TO MOBILE DEVICE

When your Smart Scale has been paired up with your phone or other mobile device, 

your data results will be transmitted to the device via Bluetooth.  An onscreen           

“     ” icon indicates a successful Bluetooth® connection.

A ”     ” icon appears while data is transmitted, then disappears when transmission is 

complete. You may review your data on your mobile device.

If the “     ” icon remains on the screen, the transmission has failed. The scale 

will temporarily store the pending data, and it will be transmitted after the next 

measurement is complete. 

Note: Data will only be transmitted if attached to a specific memory number. If a 

personal profile has not been assigned to a memory number, the results will appear 

once on the scale display only and will not be transmitted or saved.