Taylor 7222F, Instruction Manual And Warranty Information

14

15

MEASUREMENT PROCEDURES WITHOUT BLUETOOTH®

Use these tips to get the most accurate and consistent readings from 

your scale:

• Place the scale on a flat, hard floor surface. Carpeted or uneven 

floors may affect accuracy. If you experience any difficulty, move 

the scale to a different, hard flat surface and try again.

• You must have bare feet for estimation results. Remove your shoes 

and socks before proceeding. Clean, slightly moist feet will provide 

the best results.  Position your feet for maximum contact with the 

metal electrodes on the platform.

• Balance your weight evenly between both feet and stand still while 

on the scale.

• Weigh yourself at the same time each day to see consistent trends. 

Your weight and other measures will naturally vary during the 

course of the day.

• 

IMPORTANT:

 The scale needs to be initialized after battery installation 

or if it is moved or bumped. At all other times, you may step directly 

on the scale for a reading.  To initialize the scale, simply press firmly 

on the scale platform. The display will turn on and automatically 

turn off. Your scale is now ready for use.

Measuring by Selecting a User Number Manually

1.

 Press “

SET

” to turn the scale on. 

2.

 Press “▲” or “▼” to move to your memory number (P1-P8).

3.

 The memory number will blink 3 times then remain steady. The display will show 

your data and then zero.

(

Note:

 if you press “

SET

” while the memory number is blinking, the scale will enter 

Setting Mode instead of Measurement Mode. If this occurs, press “

SET

” to re-confirm 

all the data. The scale will show the data again and then zero. When the (    ) icon 

appears on the LCD the data is not sent to a mobile device.

4.

 When the scale shows zero, step on the 

scale with bare feet, positioning your feet 

evenly on the scale platform with maximum 

contact with the metal electrodes.

5.

 Stand still while the scale measures your weight. Your weight will appear on the 

screen. Continue to stand still on the scale. A moving zeros pattern shows while 

the scale estimates your body composition.

6.

 Your body fat % (

FAT

), total body water % (

TBW

), muscle mass (

MUS

), calorie 

estimate (

CAL

), and the difference between your current and goal weights are 

displayed sequentially 3 times. 

(A “    ” arrow by the goal weight number indicates you are over your goal  

   weight. A “    ” arrow indicates you are under your goal weight.)

7.

 The scale will turn off automatically.

Notes: 

A)

 If the scale is paired with your mobile device and the Bluetooth® is ON, the scale 

will send the measurement results to the mobile device instead of the scale, and 

the scale display will be blank. 

B) 

If the scale cannot identify the user’s memory number, it will only display the 

weight. See “

Problem Solving

” section.

BODY FAT

BODY WATER

MUSCLE MASS

CALORIE ESTIMATE

GOAL WEIGHT

MEASURING USING AUTO RECOGNITION FEATURE

After you have saved your personal profile data into a memory number and 

weighed yourself once, the scale will automatically recognize you for future weigh-

ins. It does this based upon the weight of the user (it will detect all profiles /- 

4.4 lbs / 2 kgs).

1. 

When you step the platform, if there is only one user whose last weight data is 

close to the current one, the memory number will be selected automatically. 

When estimates are completed, the results appear on the scale.

2. 

If two or more users are in a similar weight range (/- 4.4 lbs 

/ 2 kgs), the scale will notify you to choose between, for example, 

P1 and P2.  Press “▲” or “▼” to get to the correct number and 

select the user by pressing ‘

SET

’.  If the scale cannot identify the 

user’s memory number, it will only display the weight. See “Problem 

Solving” section.

Note: You need to save your personal data in a user number before using the 

automatic user identification measuring method, or the function will not work.

PRECAUTION !

The scale must 

be started up 

after each 

battery insertion/ 

replacement of 

battery or each 

time it is moved or 

bumped.

PRECAUTION !

Do Not step on scale 

unevenly (X)

To avoid injury, do not 

step with wet feet or on 

the edge of the platform.