1-4
INTRODUCTION/SAFETY
Model C152 & C161
Introduction/Safety
1
Model C152 Specifications
Freezing Cylinder
One, 1.5 qt. (1.4 L) volume.
Mix Hopper
One, 8 qt. (7.6 L) capacity.
Beater Motor
One, 0.5 hp.
Refrigeration Machine
One 3,000 BTU/hr compressor. R404A.
Separate Hopper Refrigeration (SHR), one 400 BTU/hr.
R134a.
(Actual BTUs will vary based on application.)
Electrical
Table 1-1
This machine may be manufactured in other electrical
characteristics. Refer to the local Taylor distributor for
availability. (For exact electrical information, always see
the data label of the machine.)
Air-Cooled
Clearance:
4 in. (102 mm) on left and right, and 0 in.
(0 mm) at the rear. If the machine has legs, install the
skirt provided on the right side of the machine. Minimum
air clearances must be met to ensure adequate air flow
for optimum performance.
Dimensions
Width:
17-3/8 in. (441 mm)
Depth:
29-3/8 in. (746 mm)
Height:
27 in. (686 mm)
Counter Clearance:
Designed to rest on a plastic pad
directly on the counter top or optional cart.
Approximate Weights
Note:
For reference only, weights may vary depending
on accessories.
Net:
207 lb. (94 kg)
Crated:
238 lb. (108 kg)
Volume:
21.1 cu. ft. (0.60 cu. m)
Availability and specifications are subject to change
without notice.
This machine is designed and constructed to meet
stringent safety and sanitation requirements for NSF
and UL.
Electrical
Total Amps
Supplied with
NEMA Cord
115/60/1 Air
16.0
5-20P
208/230/60/1 Air
10.2
6-15P
220-240/50/1 Air
7.8
---
Summary of Contents for C152
