Section 2
2-1
Model C303 & C314
To the Operator
2
To the Operator
The freezer you have purchased has been carefully
engineered and manufactured to give you dependable
operation.
When properly operated and cared for, your freezer will
produce a consistent quality product. Like all mechanical
products, this machine will require cleaning and
scheduled maintenance. A minimum amount of care and
attention is necessary if the operating procedures
outlined in this manual are followed closely.
IMPORTANT!
This manual should be read
before operating or performing any maintenance on your
equipment.
Your freezer will not eventually compensate and correct
for any errors during the setup or filling operations. Thus,
the initial assembly and priming procedures are of
extreme importance. It is strongly recommended that all
personnel responsible for the equipment's operation
study these procedures together in order to be properly
trained and to make sure that no misunderstandings
exist.
If you require technical assistance, please contact your
local authorized Taylor distributor for service.
Note:
Your Taylor warranty is valid only if the parts are
authorized Taylor parts, purchased from the local
authorized Taylor distributor, and only if all required
service work is provided by an authorized Taylor service
technician. Taylor reserves the right to deny warranty
claims on units or parts if non-Taylor-approved parts or
incorrect refrigerant were installed in the unit, system
modifications were performed beyond factory
recommendations, or it is determined that the failure was
caused by abuse, misuse, neglect, or failure to follow all
operating instructions. For full details of your Taylor
warranty, please see the Limited Warranty section in this
manual.
IMPORTANT!
If the crossed-out waste
container symbol is affixed to this product, it signifies that
this product is compliant with the EU Directive as well as
other similar legislation in effect after August 13, 2005.
Therefore, it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
The user is responsible for returning the product to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.
Summary of Contents for C303
