3-2
SAFETY
Model C706
Safety
3
oil-resistant, sheathed flexible cable not lighter
than ordinary polychloroprene or other equiva-
lent synthetic elastomer-sheathed cord (code
designation 60245 IEC 57) installed with the
proper cord anchorage to relieve conductors
from strain, including twisting, at the terminals
and protect the insulation of the conductors
from abrasion.
•
If the supply cord is damaged, it must be
replaced by the manufacturer, service agent, or
a similarly qualified person, in order to avoid a
hazard.
Failure to follow these instructions may result in
electrocution. Contact your local authorized Taylor
distributor for service.
WARNING!
Avoid injury.
•
DO NOT
allow untrained personnel to operate
this machine.
•
DO NOT
put objects or fingers in the door spout.
•
DO NOT
operate the machine unless all service
panels and access doors are fastened with
screws.
•
DO NOT
remove the machine door or beater
assembly unless the control switches are in the
OFF position.
WARNING!
This machine has many sharp
edges that can cause severe injuries.
•
DO NOT
put objects or fingers in the door
spout. This may contaminate the product and
cause severe personal injury from blade
contact.
•
USE EXTREME CAUTION
when removing the
beater assembly. The scraper blades are very
sharp.
•
USE EXTREME CAUTION
when handling the
cup/cone dispenser (if supplied with machine).
Two people are required to handle the cup/cone
dispenser. The appropriate type of protective
gloves must be worn and the mounting holes
must
NOT
be used to lift or hold the dispenser.
Failure to follow these instructions can result in personal
injury or damage to the machine.
CAUTION!
This machine must be placed on a
level surface. Failure to comply may result in personal
injury or machine damage.
IMPORTANT!
Access to the service area of
the machine is restricted to persons having knowledge
and practical experience with the machine, in particular
as far as safety and hygiene are concerned.
Summary of Contents for C706
