USER INTERFACE
5-11
Models C709 & C717
User Interface
5
To set the AUTO HEAT TIME, select the Up arrow key to
move the arrow to “Change.” Then press the SEL key.
The screen displays the time with the cursor under the
hour position.
Select the arrow keys to increase or decrease the hour to
the desired setting. Then move the cursor to the minutes
position by pressing the SEL key. Adjust the setting for
minutes, then select the SEL key to save the setting and
return to the AUTO HEAT TIME screen. Select the SEL
key to exit the screen and return to the Manager’s Menu.
The AUTO START TIME option allows you to set the time
of day at which the machine automatically enters the
Auto mode from the Standby mode. The machine must
be in the Standby mode without a freezer lock condition
to auto start at the programmable time. The auto start
time can also be disabled and require starting the Auto
mode manually.
Enable the AUTO START TIME can by selecting the Up
arrow key to move the arrow up to “Enable.” Press the
SEL key to advance to the next screen.
Program the auto start time by selecting the Up arrow
key to move the arrow to “Change.” Press the SEL key to
advance to the next screen.
Use the arrow keys to program the auto start time by
increasing or decreasing the hour setting above the
cursor. Press the SEL key to advance the cursor and
program the minutes setting. Select the SEL key to return
to the previous screen with the new time setting
displayed. Select the SEL key to exit the screen and
return to the Manager’s Menu.
The AUTO STANDBY TIME option allows you to set the
time of day at which the machine automatically enters the
Standby mode from the Auto mode. This allows power
saving during slow sales. By default, this feature is
disabled.
Enable the AUTO STANDBY TIME by pressing the Up
arrow key to move the arrow up to “Enable.” Press the
SEL key to advance to the next screen.
Program the auto standby time by pressing the Up arrow
key to move the arrow to “Change.” Press the SEL key to
advance to the next screen.
Use the arrow keys to program the auto standby time by
increasing or decreasing the hour setting above the
cursor. Press the SEL key to advance the cursor and
program the minutes setting. Press the SEL key to return
to the previous screen with the new time setting
displayed. Press the SEL key to exit the screen and
return to the Manager’s Menu.
AUTO HEAT TIME
00:00
AUTO START TIME
DISABLED
Enable
> Disable
AUTO START TIME
00:00
Change
> Exit
AUTO START TIME
00:00
AUTO STANDBY TIME
DISABLED
> Enable
Disable
AUTO STANDBY TIME
00:00
Change
> Exit
AUTO STANDBY TIME
00:00
Summary of Contents for C709
