C713 Operator Training
C713 Operator Training
C713 Operator Training
C713 Operator Training
19
Step 1
Remove the hopper cover and the feed tube. Take them to the sink for cleaning.
Step 2
With a pail beneath the door spouts, touch the WASH symbol and open the draw valve.
Step 3
If local health codes permit the use of rerun, place a sanitized, NSF approved stainless steel
rerun container beneath the door spout. Press the WASH key and open the draw valve. Drain the
remaining product from the freezing cylinder and mix hopper. When the flow of product stops, press
the WASH key and close the draw valve. Place the sanitized lid on the rerun container and place it
in the walk-in cooler.
Note: If local health codes DO NOT permit the use of rerun, the product must be discarded. Follow
the instructions in the previous step, except drain the product into a mix pail and properly discard
the mix.
Draining Product