C713 Operator Training
C713 Operator Training
26
C713 Operator Training
C713 Operator Training
Troubleshooting: Cylinder
Freezing cylinder walls are scored.
Cause: Missing or worn front bearing and
scraper blades.
Remedy: Install or replace the front
bearing and scraper blades.
Cause: Broken freezer door baffle rod.
Remedy: Replace freezer door.
Cause: Beater assembly is bent.
Remedy: Replace beater assembly.
Cause: Gear box is out of alignment.
Remedy: Call an authorized service
technician.
The drive shaft is stuck in the drive coupling.
Cause: Mix and lubricant collected in drive
coupling.
Remedy: Brush clean the shell bearing area
regularly.
Cause: Rounded corners of drive shaft, drive
coupling, or both.
Remedy: Call an authorized service
technician.
Cause: Gear box is out of alignment.
Remedy: Call an authorized service
technician.