The scale will automatically shut off to conserve the batteries if operating on
battery power. The auto-shut off feature can be disabled to allow the scale to
operate continuously or set from 2 minutes to 5 minutes.
1.
While the scale is off, press and hold the “
ON/OFF
” button.
2.
While continuing to hold the “
ON/OFF
” button, press the “
COUNT
” button 3 times.
3.
Release the buttons. The display shows “SEt”, then “P-1.00”, then “AOFF”.
4.
Press “
ZERO/
”. The display shows the current auto-shut off time (example:
“120” for 120 second auto shut-off).
5.
Press “
UNIT
” to cycle through the options: “120”, “180”, “240”, “300”, or “OFF”
(the scale will remain on until “
ON/OFF
” is manually pressed).
6.
Press “
ZERO/
” to select the desired setting. The display shows “
AOFF
”.
7.
Press “
UNIT
” until “End” displays, then press “
ZERO/
”.
8.
Set up is complete. The scale returns to weighing mode.
Note:
If the scale is operating on adapter power, it will remain on until the
“
ON/OFF
” button is manually pressed.
AUTO SHUT-OFF FEATURE
