INSTALLATION INSTRUCTIONS
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
CUSTOMER SERVICE WEST 1-800-267-4774 | EAST 1-800-387-7064 | taymor.com
13
EXPLODED DIAGRAM FOR REFERENCE
MAINTENANCE
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners,
steel wool and harsh chemicals as these will dull the finish and void your warranty.
8
HOSE GUIDE INSTALLATION
Insert hose guide (1) into deck.
From underneath deck, secure hose guide
with rubber washer (1), metal washer (2)
and locknut (3). Wrench tighten.
Connect the valve body outlets to the
diverter body inlets using high flow flexible
lines supplied.
A
B
C
9
SPRAY HOSE CONNECTION
Insert coiled spray hose (1) through hose
guide (2).
Carefully thread and tighten one end of the
braided connector hose (1) to the coiled
spray hose (2) and one end to the diverter
body (3). Restrain coiled spray hose (2) with
clip (4).
1
3
2
4
A
B
CAUTION: Check all connections for leaks.
Failure to do so can result in water damage.
WATER SUPPLY CONNECTION
Connect water supply lines (1) to housing assembly (2). Hot water supply lines go into
left inlet. Cold water supply lines go into right inlet. (Supply lines not included.)
11
FLUSHING
Turn on hot and cold water supplies and flush the
water lines for one minute. Pull hose to its farthest
extension and point it down into the tub. Pull the lift
rod up to the full ON position and flush water lines
for one minute. After flushing, turn the handles all
the way off to shut off the water. The lift rod should
now be in its normal position.
12
HAND HELD SHOWER INSTALLATION
Connect hand held shower (1) into the end of the elbow (2)
by turning clockwise. Hand tighten.
10
CALEDONIA 06-4091HS / 06-4091HSSN
ROMAN TUB FAUCET
1 - LIFT ROD KNOB
2 - LIFT ROD
3 - INDEX
4 - SPOUT
5 - SET SCREW
6 - RECTIFIER
7 - DISC
8 - O-RING
9 - VALVE
11 - HANDLE
12 - SET SCREW
14 - CONNECTOR
15 - INVERTER
16 - HANDLE FLANGE
17 - DIVERTER
18 - O-RING
19 - CONNECTOR
20 - O-RING
21 - WASHER
22 - RUBBER
WASHER
23 - METAL
WASHER
24 - LOCKNUT
25 - BODY
26 - BONNET
27 - CARTRIDGE ASSEMBLY
28 - FLANGE
29 - FLANGE
WASHER
30 - RUBBER WASHER
31 - METAL WASHER
32 - LOCKNUT
33 -HOUSING
ASSEMBLY
34 - COUPLING NUT
35 - HIGH FLOW FLEXIBLE LINES
36 - BRAIDED CONNECTOR HOSE
37 - HAND HELD SHOWER
38 - SHOWER FLANGE
39 - SET SCREW
41 - ELBOW
42 - LONG SHANK
43 - WASHER
44 - RUBBER
WASHER
45 - METAL
WASHER
47 - CLIP
48 - COILED
SPRAY
HOSE
TORQUE
6 - 10 FT/LBS.
1
2
1
2
1
TORQUE
11 - 15 FT/LBS.
1
2
3
1
2
1
2
10 - HANDLE SEAT
13 - O-RING
40 - O-RING
46 - NUT
