25/ 42
2
ZT1P58MJ right crankcase cover b
1
3
Fb22×32×7 fluorine rubber oil seal
1
The oil seal is press-fitted on the right cover
4
ZT1P58MJ right crankcase cover gasket
1
5
Φ 10×14 hollow positioning pin
2
6
M5×15
－
5# hexagon socket head screw (oxidized black)
2
Apply thread glue. Fixed torque: 5±1 N.m
7
ZT1P58MJ oil pump parts
1
When the oil pump is installed, it is necessary
to inject an appropriate amount of oil into the
rotor
8
ZT1P58MJ oil pump paper gasket
1
Right crankcase cover
Assembly
1. Use a t-shaped sleeve -8# to remove the locking bolt of the right crankcase cover, and take out the right crankcase cover, right
crankcase cover gasket and positioning pin.
Inspection
1 check that the right crankcase cover oil seal (FB22×32×7 fluorine rubber oil
seal)
has no scratches or damage on the main and
auxiliary lips.
Install
1. After the positioning pin is installed in place, put in
the new ZT1P58MJ right crankcase cover gasket,
put the right crankcase
cover in place, put in 7 m6×22 hexagon flange bolts, and pre-tighten diagonally from the positioning pin tighten with fixed torque,
fixed torque: 12±1.5 N.m.
Oil pump
Assembly
1. Use the inner hexagon -5# to remove the locking bolts of the oil pump sub-components, and remove the oil pump
sub-components and the paper gasket of the oil pump
