RAYTHON User Manual V1.0
4.7.3 Connecting the Loads
Do not connect the output of this equipment to the same line as other AC sources such as
the 230V external mains or a generator.
Two groups of output terminals are supplied with this RAYTHON system. The labeled terminal is
supplied with protected MCB.
Using correct cable gauge (refer to chapter 4.4), please connect the load to the terminal labeled
“
AC
OUT1
”“
AC OUT2
”
. Make sure the connection is correct and tightly screwed.
有些机型,
AC OUT
接在
MCB
上
For some models, the AC OUT is connected to the MCB