User Manual NVR TBK-NVR5016P8 TBK PLUS
13
www.tbkvision.com
5.1 Basic configuration
Basic configuration includes three sub menus: system, date & time and DST.
5.1.1
System
①
Go to Main Menu
Setup
Basic
System. Refer to Fig 5-3.
Fig 5-3 Basic Configuration-System
②
In this interface you can set up the device name, device ID, video format, max network user, VGA resolution and language. The
definitions for every parameters display as below:
Device Name:
The name of the device as it may display on the client end or on TBK VMS-3000, this would help the user to recognize the
device remotely.
Device ID:
This ID is used to map the NVR and speed dome cameras.
Video Format:
Two modes: PAL and NTSC. User can select the video format according to the cameras being used.
Password Check:
If enabled
the user would need to input the user name and the password for performing corresponding operations.
Show System Time:
If selected, displays the current time during live monitoring.
Max Online Users:
To set the maximum number of concurrent user logins in the NVR.
Show wizard:
If selected, the GUI would launch the startup wizard on every boot, allowing user to do basic setup.
Video Output:
Resolution of live display interface.
Language:
To set up the menu language.
Note: After changing the language and video output, the device needs to login again.
Logout After (Minutes):
You can set up the screen interval time (30s, 60s, 180s, 300s). If there is no any operation within the setting period,
the device will auto logout and return to the login interface.
No Image When Logout:
If selected, there will be no image showing when logout.
5.1.2 Date & Time
①
Go to Main Menu
Setup
Basic
Date & Time tab. Refer to Fig 5-4.
Fig 5-4 Basic Configuration-Date & Time
②
Set the date format, time format, time zone in this interface; checkmark “sync time with NTP server” to refresh NTP server date. You can
adjust system date manually
③
Click “Apply” button to save the settings.
