User Manual NVR TBK-NVR5016P8 TBK PLUS
17
www.tbkvision.com
Fig 5-12 Record Configuration-Time
Pre-alarm Record Time:
Set the time in seconds to pre-record before the actual recording begins.
Post-alarm Record Time:
Set the time in seconds to post-record after the actual recording has finished. Five options: 10s, 15s, 20s, 30s, 60s,
120s, 180s and 300s.
Expire Time:
Set the expiration time for recorded video. If the set date is overdue, the recorded files will be deleted automatically.
5.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the video. The user can also choose a position for the
stamp on the screen.
To set up stamp as follows:
①
Go to Main Menu
Setup
Record
Stamp interface. Refer to Fig 5-13.
Fig 5-13 Record Configuration-Stamp
②
Checkmark camera name and time stamp. Click Setting button to set up the position of the stamp. You can drag the camera name and
time stamp at random positions. Refer to below Figures.
Before drag After drag
③
Select “All” to set up all channels with the same parameters.
5.3.5 Recycle Record
This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records and recycle the
space if it is completely utilized. The setting steps are as follows:
①
Go to Main Menu
Setup
Record
Recycle Record interface.
②
Checkmark recycle record to activate auto recycling. If the option is disabled or not selected, the NVR would stop recording once HDD
is full.
③
Click “Apply” button to save the setting.
5.3.6 Snap
In this interface, user can set up resolution, quality, snap interval, snap number.
