User Manual NVR TBK-NVR5016P8 TBK PLUS
7
www.tbkvision.com
The interface of remote controller is shown in Remote Controller.
Remote Controller
2.6 Connect with Mouse
2.6.1 Connect Mouse
It supports USB mouse through the ports on the rear panel.
If mouse is not detected or doesn’t work, check below steps:
1. Make sure the mouse is plugged in the USB mouse port.
2. Try with a good know mouse.
2.6.2 Use Mouse
During live:
Double-click on any camera window to see the full screen. Double-click again to return to the previous screen.
Right click to reveal the control menu on the screen. Right click again to hide the menu.
In Configuration:
Click to enter a particular option. Right click to cancel the option or to return to the previous menu.
In order to input a value in a particular screen, move cursor to the input box and click. An input window will appear. It supports
digits, alphabets and symbols input. Click “Shift” button to input Capital letters and symbols; click “Shift” button again to return.
It supports mouse drag. Take setting up motion detection area for example: Click customized, hold down the left button and drag
to set motion detection area.
Digital Numbers and Letters Input Window
In Playback:
Click to choose the options. Right click to return to live mode.
In Backup:
Click to choose the options. Right click to return to previous picture.
In PTZ Control:
Click left button to choose the buttons to control the PTZ. Click right button to return to live.
Note: Mouse is the default tool for all operations unless an exception, as indicated.
REC
Record manually.
Search
To enter search mode.
MEUN
To enter menu.
Exit
To exit the current interface.
ENTER
To confirm the choice or setup.
Directio
n button
To move cursor in setup.
ZOOM
To zoom in.
PIP
To set picture in picture.
To
control
playback.
Play/Pause/Stop/Previous Section/Next
Section/Rewind/Fast Forward.
Multi
To choose multi screen display
mode.
Next
To switch between single picture
and picture group.
SEQ
To go to auto dwell mode.
INFO
Get information about NVR like
firmware version, HDD information.
