background image

Operating Instructions

1. Do not disassemble the camera. 
2. Always handle the camera with care. Please avoid mechanical shock  
    or vibration, and take caution to prevent damages or make scratches 
    on the camera glass due to careless storage and/or handling. 
3. Do not clean the camera body with strong abrasives or soaps. When 
    the camera becomes dirty, clean it with dry rugs. Take precaution to 
    use dedicated rugs to clean glass. 
4. Please keep the camera in a cool area that is not exposed to direct 
    sunlight. Failing to do so can cause undesired effects on the product.  
     

Notes on installation and usage

 

     

Nothing appears on the screen.
   

ㅡ>

Check the power connection and video signal line connection.

   

ㅡ>

Check the brightness level of DC Auto Iris volume of the camera.  

The screen is dark
   

ㅡ>

Adjust the brightenss feature of the monitor.

   

ㅡ>

Check the brightness level of DC Auto Iris volume of the camera.

The video image is not clear.
   

ㅡ>

Check if the camera glass has dust on the surface.

         Clean the camera glass with a clean cloth or brush.
   

ㅡ>

Make sure that the screen is not exposed directly to a bright light.

         Adjust the position of the camera if necessary.
   

ㅡ>

Check if protective film of camera glass is removed.

The screen does not properly display when IR LEDs work.
   

ㅡ>

Check if the camera glass has dust.

         Clean the camera glass with a clean cloth or brush.

If you have trouble operating the camera, check the following 
guides for the possible problem.

  

If you cannot solve the problem with above guidelines, 
please contact an authorized technician. 

 

 

 

10 

 

ITEM 

Image Sensor 

Effective Pixels 

Scanning System 

Scanning Frequency 

Resolution 

Shutter Speed 

S/N Ratio 

Sync. System 

Min. Illumination 

Video Output 

Lens 

18~50mm Day&Night Vari-Focal DC Auto Iris Lens (F1.5) 

Power Supply 

Power  

Consumption 

Operating Temp 

Operating Humidity 

Dimension 

1/3” Interline transfer type color CCD (Sony) 

768H x 494v (380K pixels) 

752H x 582v (440K pixels) 

525 Lines 2:1 Interlace 

625 Lines 2:1 Interlace 

15.734KHz(H), 59.94Hz(V) 

15.625KHz(H), 50Hz(V) 

550 TVL(Color), 580TVL(B/W) 

1/60 sec. 

More than 48dB (AGC Off) 

Internal 

0 Lux with IR-LED (42pcs) 

VBS 1.0 Vp-p (75 ohm Load) 

Normal : 250mA, Max : 900mA / DC12V  

Normal : 4.8VA, Max : 20VA / AC24V  

90% RH max 

98mm(   ) x 162.5mm( L ) 

1/50 sec. 

NTSC 

PAL 

AC24V / DC12V + 10% 

OperaTIng InsTrucTIons 

Troubleshooting 

Specifications 

 

Summary of Contents for TBK-1020HVLD78IR













Reviews: