background image

Operating Instructions

 

Precautions 4 

To prevent electric shock, do not remove screws or covers. There 
are no user serviceable parts inside. Ask a qualified service  
personnel for servicing. 

Do not attempt to disassemble the camera. 

Composition 5 

Features 6 

Name of Each Part 

Installation 

Troubleshooting 

10 

Specifications 

11 

Dimension 

Notes on installation and usage 

Camera installaton 

Explanation of Accessories 

Contents 

 

Do not aim the camera at bright objects. Never face it with direct 
sunlight or other extremely bright object. Otherwise blooming or  
smear may be caused. 

Avoid facing the camera with direct sunlight. 

Use a dry cloth to the camera when it is dirty. If it is hard to remove 
the dirt on the camera, use a mild detergent and wipe it gently. 

Do not use strong solvents or detergents. 

Do not abuse the camera. Avoid striking, shaking, etc. The camera  
could be damaged by improper handling or storage. 

Handle the camera with care. 

Do not use in a room or area filled with cigarette smoke, dust or gas. 

Do not expose the camera in such conditions  
shown below. 

Before operating, please check proper tempe- 
rature, humidity and power source ratings. 

OperaTIng InsTrucTIons 

Precautions 

Summary of Contents for TBK-1020HVLD78IR













Reviews: