TBK-NVR2100 Network Video Recorder User Manual V2
119
Configure the following Email settings:
Enable Server Authentication (optional):
Check the checkbox to enable the server
authentication feature.
User Name
: The user account of sender’s Email for SMTP server authentication.
Password
: The password of sender’s Email for SMTP server authentication.
SMTP Server:
The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port No.:
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS (optional):
Click the checkbox to enable SSL/TLS if required by the
SMTP server.
Sender:
The name of sender.
Sender’s Address:
The Email address of sender.
Select Receivers:
Select the receiver. Up to 3 receivers can be configured.
Receiver:
The name of user to be notified.
Receiver’s Address:
The Email address of user to be notified.
Test:
Sends a test message to verify that the SMTP server can be reached.
Click
Apply
to save the Email settings.
You can click
Test
to test whether your Email settings work. The corresponding
Attention message box will pop up.
Configuring NAT
Purpose:
Two ways are provided for port mapping to realize the remote access via the
crosssegment network, UPnP™ and manual mapping.
⚫
UPnP
TM
Email Settings Interface