TBK-NVR2100 Network Video Recorder User Manual V2
58
You can click the button to set the accurate time of the schedule.
To schedule an all-day recording, check the checkbox after the
All Day
item.
To arrange other schedule, leave the
All Day
checkbox blank and set the Start/End
time.
Up to 8 periods can be configured for each day. And the time periods cannot be
overlapped each other.
Select the record type in the dropdown list.
⚫
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm)
and VCA (Video Content Analysis) triggered recording and capture, you must
configure the motion detection settings, alarm input settings or VCA settings
as well. For detailed information, refer to
Chapter 8.1
,
Chapter 8.2 and
Chapter 5.5 .
⚫
The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording for other days in the week.
You can click
Copy
to enter the Copy to interface to copy the schedule settings to
other days
Click
Apply
in the Record Schedule interface to save the settings.
Draw the Schedule
Click on the color icons, you can choose the schedule type as continuous or event.
Edit Schedule
