- 6 -
Sleep mode*
•
Plug in the external power supply
•
Insert CompactFlash Card containing DV Studio Software exported “.pll / .prj” and
other digital files. (e.g. .mpg, .mp3, .jpg) All filename should be in 8+3 format (i.e.
xxxxxxxx.xxx) and avoid using any illegal characters like “~”, “_”, “-“, etc
•
Switch the power 'on/off' switch to 'on'.
•
Press the 'play' button'.
•
The first track of the collection of MPEG files will be played.
Note: special specific track playback activated by assigned button can also be performed in
sleep mode - contact local sales office.
*The Autoplay and Sleep playback mode are selected when writing the MPEG files on to the
CompactFlash Card by using DV Studio Software.
C) AUTO-LOOP PLAYBACK
After Track 1 is set to play, it will play to the end, than Track 2 will start playing from
beginning to end, then Track 3 etc. When the MPL024 plays to the end of the last track, it
will automatically jump back to the beginning of Track 1, repeating tracks 1, 2 then 3 etc. The
MPL024 will play in auto-loop play mode, so long as none of the function buttons are
pressed. (NOTE: Loop playback is the standard playback setting of the MPL024 but the track
playback sequence can be changed as required.)
