7
7.1 NETWORK SETUP
Network with:
Select your network connection Disable/ RJ45.
IP Assigned by DHCP:
If you have a DHCP-enabled router, please select “On”, then the router will
automatically assigns an IP address to the MPL027P. If you don’t have a DHCP –enabled router,
select “Off” and type the network information in “
Assign IP Address
”.
Assign IP Address:
If the MPL027P is connected to a network without a DHCP server or you want
to use Local FTP Server function, enter the fixed IP address, Mask, Gateway and DNS for the
MPL027P.
PS. Refer to 4.1 for how to enter IP address by remote control.
NOTE:
Before setting the IP address, Mask, Gateway and DNS, check the network information of your
PC. Please follow the steps below to get the network information of your PC.
Step 1:
Click on “Start”
→
“Run” and type in “command”, then press “ENTER”.
The MS-DOS window will appear, type in “ipconfig” and then press “ENTER” to get the network
information.
Step 2:
Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway) for the MPL027P.
Enter the same values of the Subnet Mask and Gateway, and be careful not to enter the values of IP
address that are already used by other devices on the network.
Media Player 11 Server:
Enable/ disable the Media Player 11 server.
