45
11.2 IR Cable
The IR cable is an external remote control receiver. Connect the IR Cable to the IR input.
11.3 PIR SENSOR
Application 1:
The PIR is an external remote control receiver.
Application 2:
The PIR is a motion detector.
11.3.1 Using the PIR Sensor
Step 1:
Set the repeat mode to the “
Repeat Default
”.
Step 2:
Insert the CF card to the MPL027PT-X, and the MPL027PT-X will play the default file
automatically while powered on.
Step 3:
After sensing approaching subjects, the MPL027PT-X will play all the demo files once.
46
11.4 TOUCH-SENSOR BUTTONS
11.4.1 Features of the Touch-Sensor Buttons
The number of touch-sensor buttons can be customized to 12, 24 or 36 for OEM project.
Used with various operating environment (glass, plastics and acrylic material, except metal
material), the thickness supports 3mm -5mm, and it can be customized to 5cm for OEM project.
11.4.2 Demo Files
Ex. Using the wireless 5 Touch-Sensor Buttons
Put 6 demo files on CF card. (1 default file and 5 demo files)
NOTE:
The files are sorted by filename in ascending order alphanumerically (numbers < upper case
letters < lowercase letter). Each button is mapped to a file by this order.
For Example
：
There are 6 demo files on the CF card. The file names are
a01.xxx
,
33.xxx
,
b55.xxx
,
1abc.xxx
,
07.xxx
and
A01.xxx
. ( xxx is extension of the file )
Default File
：
07.xxx
Demo File 1
：
1abc.xxx
Demo File 2
：
33.xxx
Demo File 3
：
A01.xxx
Demo File 4
：
a01.xxx
Demo File 5
：
b55.xxx
11.4.3 Connect to the Touch-Sensor Buttons
Open the battery cover and set the batteries (AA size) as shown below. Please note that the
polarity of the battery.
