9
7. SETTING UP
In the main menu, using the “
▼
” button on remote control to select the “
SETUP
” item, and then
press the “ENTER” button. You will be presented with the MPL027PT-X settings screen.
You can also press the “
SETUP
” button on remote control to directly open the settings screen.
(If there is file that is being play, please stop first.)
There are five groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”, “Video
Setup”, “Other Setup” and “Scrolling Setup”).
In the settings screen, you can use the “
▲
、
▼
、
▲
、
▼
” buttons to select an item, and press the
“ENTER” button to confirm the selection.
Press the “SETUP” button on remote control to save and quit the settings screen.
7.1 NETWORK SETUP
7.1.1 Setting the Network from the OSD Menu
Network with:
Select your network connection Disable/ RJ45.
IP Assigned by DHCP:
If you have a DHCP-enabled router, please select “On”, and then the
router will automatically assigns an IP address to the MPL027PT-X. If you don’t have a
DHCP –enabled router, select “Off” and type the network information in “
Assign IP Address
”.
10
Assign IP Address:
If the MPL027PT-X is connected to a network without a DHCP server or
you want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway and
DNS for the MPL027PT-X.
PS. Refer to 5.1 for how to enter IP address by remote control.
NOTE:
Before setting the IP address, Mask, Gateway and DNS, check the network information
of your PC. Please follow the steps below to get the network information of your PC.
Step 1:
Click on “Start”
→
“Run” and type in “command”, then press “ENTER”.
The MS-DOS window will appear, type in “ipconfig” and then press “ENTER” to get the network
information.
Step 2:
Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway) for the
MPL027PT-X.
Enter the same values of the Subnet Mask and Gateway, and be careful not to enter the values
of IP address that are already used by other devices on the network.
7.1.2 Setting the Network from the IP Detect Tool
With the bundle tool “IP Detect”, user could search MPL027PT-X on the local area network. User could
also change the IP setting via this tool. For example, user might assign a static IP to MPL027PT-X by
the steps as below:
Step1:
Download the IP Detect Tool from our Website:
http://www.tbmgmbh.de/produkte/cf-mediaplayer/cf-mediaplayer-hd/mpl027pt-x-hd-1080p
Install with: Autorun.exe