Troubleshooting
●
If the motors spin up when the battery is plugged in, connect the XRacer to CleanFlight.
Open the
“CLI”-tab and type the following to enable brushed motors and press enter:
“set motor_pwm_rate=32000”
“save”
●
If you see lines on the video coming from the XRacer, the battery voltage is low and you need to
charge it.
●
If the video quality drops off quickly when you fly farther than 10m away, ensure that the pigtail
is securely connected to the UFL plug on the VTx. If needed, you can glue it to the VTx.
36