Address:
East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055
11
/
11
3.
Transport Stream ID: It is a number that identifies a specific transport stream. Enter any value from
(0-65535).
4.
Network Name:
It is the name that identifies the network where the signal is distributed to
.
5.
Provider Name: It is the name that identifies the provider of the signal.
6.
Output Bitrate: Enter any value from (10-50M) according to your system requirements.
7.
Frequency: Enter Frequency value for DVB-C output.
8.
Bandwidth: Enter Bandwidth value for DVB-C output.
9.
Symbolrate: Enter Symbol rate value (2000-7200kbps) for DVB-C output.
10.
Modulation: Enter Modulation value for DVB-C output.
11.
Level: Enter gain value (5-120) for DVB-C output. It is correspondence to RFlevel (dBm).
6. Maintenance
6.1 Instructions for returning by mail
➢
Instruments returned for repair or calibration, either within or out of the warranty period, should be
sent with the following information: Name of the Company, name of the contact person, address,
telephone number, receipt (in the case of coverage under warranty) and a description of the problem or
the service required.
➢
Mail:
or
6.2 Cleaning Recommendations
➢
CAUTION
:
To clean the cover, take care the instrument is disconnected.
➢
CAUTION:
Do not use scented hydrocarbons or chlorized solvents. The cover should be cleaned by
means of a light solution of detergent and water applied with a soft cloth. Dry thoroughly before using the
system again.
➢
CAUTION:
Do not use for the cleaning alcohol or its derivatives, these products can attack the
mechanical properties of the materials and diminish their useful time of life.
