Address:
East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055
6
/
11
2. System Connection and Log in
➢
The default IP for TBS8112 DVB-S/S2/S2X to DVB-C trans-modulator is 192.168.8.101:8081.
➢
In first place, check the IP address of the PC. It must be in the same IP range of the device. This means, an
IP like 192.168.8.xxx (xxx can be 0 to 255 except 101 to avoid conflict with module IP address). Add a new
IP or change the current one to meet this requirement.
➢
Check connections. The Ethernet cable must be connected to the LAN port (see description chapter). It is
recommended to try a ping on the command-line interface to confirm they are on the same network
range and communication between them is possible.
➢
Now use a web browser to run the webserver application from the PC. Write the IP address (by default
192.168.8.101) on the URL bar and press ENTER.
➢
If connection is successful, the browser will display a login screen (see description chapter). Enter the
Username and Password (by default both are “
root
”) then click on ‘Login’ to enter the webserver
application.
NOTE: After communication is established, the user can set a new User name and Password.
The default ID: root
The default password: root
