TC Electronic BG500/210, User Manual

–

When these LEDs flash slowly, this indicates that the knob
position is far from the current memory setting.

–

When the LEDs flash quickly, this indicates that the knob
position is close to the current memory setting.

–

When the LEDS are lit steadily, this indicates that the knob
position matches the values stored in the current memory
setting.

When the 

left

LED is flashing, the knob position is 

lower

than the

current memory setting. When the 

right

LED is flashing, the knob

position is 

higher

than the current memory setting.

OPERATION – FRONT PANEL

11

EN

WYSIWYG 

(What You See Is What You Get) 

or Memory Mode

Although the three memory locations are a convenient feature that
you most likely will learn to appreciate, BG500 Combo also
features a “WYSIWYG” mode where you can rely 100% on the
position of the front panel controls.
Entering WYSIWYG mode is simple. Just press the MEMORY
button of the currently active preset. When no MEMORY LED is lit,
WYSIWIG mode is selected.

Knob Positions vs. Current Settings

When you go from one memory setting to another, or when you
switch from WYSIWYG mode to any of the three memory settings,
the position of the knobs may not reflect the current sound.

1.

When you touch a knob, the parameter instantly changes to
the knob position.

2.

Although the position of the knob now reflects the sound you

hear,

it may still differ from the position/value 

stored

with the

current preset. This is indicated by the two arrow LEDs in the
Compression/Tuner section.