8
IN
PIN2+/PIN3-
PIN2+/PIN3-
LEFT
LEFT
DI
RIGHT
RIGHT
DO
DI
DO
S/PDIF
BALANCED OUTPUTS
BALANCED INPUTS
DIGITAL AUDIO
AES/EBU
2
1
3
RS485
GPI
IN
SYNC
SERIAL NO.
TYPE: V002-B
MADE IN DENMARK
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE
AVIS:
RISQUE DE CHOC ELECTRIQUE-NE PAS
THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS AND
COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.
OUVRIR.
100-240V
50-60Hz 20W
~
AC
R
NRTL/C
UL1419
EN 60065
PROFESSIONAL
AUDIO
EQUIPMENT
REAR PANEL
Main
Power
Switch
Balanced
XLR
Inputs
Balanced
XLR
Outputs
Serial No.
Word
Clock
Input
AES/EBU
digital
In/Out
S/PDIF
digital
In/Out
RS485
In
Thru
Out
EXTERNAL
CONTROL
Pedal/Fader
Input
NOTES:
To comply with international regulations, we have also added a rear panel POWER switch.
You don’t need to use the POWER switch on the rear panel. Use the front panel POWER switch instead.
Pin 2 is »hot« on all XLR’s (IEC and AES standards). For soldering instructions please refer to page 55.
If you are connecting the DBMAX to unbalanced equipment, you must tie pins 1 and 3 together in the cable
ends away from the DBMAX.
NOTE!
Pins 1 and 3 on the DIN connectors serve as RS485 connection. Therefore, if you are connecting the unit to
other equipment that use these pins, please make sure to use 3-wire standard MIDI type cable (not a five
wire MIDI-PLUS type).
If you want to use the Pedal Input, make sure it is a momentary type.
Power
Input
