LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.
Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen,
Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding
Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China
Getting started
Creating loops
Recording your first loop
1.
Press the LOOP footswitch once. The LED will light up in red, indicating
Ditto X2 Looper is in Record Mode.
2.
At the end of the loop (for example, after eight bars), press the LOOP
footswitch again.
3.
The LED will turn green, and Ditto X2 Looper will repeat the loop continuously.
The LED will blink every time Ditto X2 Looper reaches the starting point
of the loop.
4.
Your loop can be up to five minutes long!
5.
To change the playback volume of the loop you just recorded, adjust the
LOOP LEVEL control knob.
Overdubbing
To record an overdub:
1.
Press the LOOP footswitch again while the original loop is playing back. The LOOP
footswitch LED will turn red, indicating you’re in Record mode again.
2.
When you’re done, press the LOOP footswitch once more to quit Record
mode. Ditto X2 Looper will repeat the loop with both the original recording
and the overdub.
Undo (clearing the last take)
To undo the last take you recorded:
1.
Press and hold the LOOP footswitch for 1.5 seconds or longer during playback.
2.
The LED will blink twice in rapid succession, and the last take will be removed.
Previously recorded takes will stay intact.
Stopping loop playback / recording and deleting the loop/backing track
To stop loop playback/recording and delete everything you have recorded:
1.
Press the LOOP footswitch twice and hold down your foot on the second tap for
three seconds until the backing track is deleted.
2.
If you have set the small FX selector switch to “Stop”, you can use the FX
footswitch to stop and delete the loop.
3.
The LED will turn off to indicate that the loop has been deleted.
Specifications
Bypass mode
True Bypass
Input connectors
2 x ¼" TS, unbalanced
Output connectors
2 x ¼" TS, unbalanced
Power input
Standard 5.5 / 2.1 mm DC, centre negative
>100 mA (power supply not included)
Controls
LOOP LEVEL knob, LOOP footswitch, FX footswitch,
FX selector switch, Store/Delete/Backing track level switch
Max. loop length
5 min.
Max. overdubs
Unlimited
Latency
None (analog dry-through)
USB port
Mini-B USB connector
Dimensions (H x W x D)
54 x 113 x 135 mm (2.1 x 4.4 x 5.3")
Weight
0.55 kg (1.2 lbs)
