Footswitch LED state reference
Ditto X2 Looper English Manual 21
Footswitch LED
state reference
Use this section as a reference when you are not
sure what the current LED status means.
LOOP footswitch LED…
Off
Device disconnected or no
loop in memory
Blinking green
Loop in memory, playback/
recording stopped
Green
Loop running (LED will blink
shortly when LOOP end is
reached)
Red
Loop recording
Blinking red
Loop currently being erased
or converted
FX footswitch LED…
Red
Reverse effect active
Green
Half speed effect active
Blinking red &
green
Reverse and Half speed ef-
fects active