background image

41

FACTORY PRESET LIST

51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

Flamenco Gtr
Viola Da Gamba
Irish Mandolin
Wire Harp
El Cajon Hi/Lo
Piezo Guitar Wide
Piezo Guitar Pickups
Dynamic Piezo Pickup
Kick L Snare R Rock
Kick L Snare R Dark
Kick L Snare R Sqush
Kick L Hat R Rock
Tom
Floortom
Overhead Comp
Ducking Drums
Wind Chime
Snaredrum
No Attack
Gate Channel 1
Kicks
Snares 
Crazy Kick Sucker
Djembe Hi/Lo Dyn
Bodhran
Piano
Hohner D6 Clavinet
Keyboard Radiance
Stereo Keyboards
Heavy Keyboards
Wurlitzer D/I
Transformer Sound
Post Deessing
LA-3A Compressor
De-Ess Channel 1
Comb Filter Effect
Slap Delay Effect
FM Radio News
Stereo Mastering
Vinyl Mastering
M-490 B
U-87 Vintage Comp
U-87 Soft Comp
U-89 
M-149

AKG 414

Sennheiser 416
SM-7
UMT-70si
Empty Routing

EQ and compressor for acoustic flamenco guitar (Same settings on both channels)
EQ and DRG for Viola (Same settings on both channels)
EQ and compressor (Same settings on both channels)
EQ, compressor and DRG (Same settings on both channels)
EQ and compressor for Electric Cajon (Hi/Lo settings)
Input on channel one and output on both channels - delay on channel two
Expander, EQ and Compressor (Same settings on both channels)
Input on ch.1 output on both channels.  Delay on channel 2
Expander, EQ and compressor settings for kick and snare drum
Expander, EQ and compressor settings for kick and snare drum
Expander, EQ and compressor settings for kick and snare drum
Expander, EQ and comp. for kick drum, EQ for the Hi-hat
Compressor, EQ and expander for side-tom (Same settings on both channels)
Compressor, EQ and expander for floor-tom (Same settings on both channels)
Compressor for cymbals
Two compressors on channel one (output on channel two) for heavy comp. of drums
EQ and comp for chimes
Comp and EQ for snaredrum (Same settings on both channels)
Removes the attack from your drums
Gate on channel one with Sidechain EQ on channel two (only use ch.1 output)
EQ, expander and compressor for kick-drum (Same settings on both channels)
EQ, expander and compressor for snare-drum (Same settings on both channels)
Far out kick-drum setting with input on channel one and output on channel two
Preset for Djembe with two dynamic microphones
EQ and compressor (Same settings on both channels)
EQ and compressor for piano 
For a noisy synth or el-piano

Adds on some warmth to your keyboard sound

Processing for your keyboard
Processing for your keyboard
Line in and then compression and DRG for keyboard/el-piano

A little effect thing that makes some harmonic transformer sound (Tip: Look into the EQ)

Compressor, Dynamic EQ and EQ for post processing (96 kHz mode on channel one)
Emulation of famous compressor setting
De-esser with EQ as Sidechain processing (only output channel one)

A little delay on channel two makes this effect

Long delay on channel two makes this effect
If you want to improve the received sound from your local radio station
Not a Finalizer but you can come a long way with this
When you want to convert you old vinyl records into the digital world 
Compressor and EQ for this microphone
Vintage compressor and EQ on a Neumann U-87
Soft compressor and EQ on a Neumann U-87
Compressor and EQ on a Neumann U-89
Compressor and EQ on a Neumann M-149
Compressor and EQ on an AKG 414
Compressor and EQ on a Sennheiser 416 mk2
Expander and EQ on a Shure SM-7
Compressor and EQ on a Geffel Microtech UMT - 70si
Build up your preset from here

Description

Preset

Summary of Contents for Gold Channel














































Reviews: