TC Electronic Konnekt 24D User Manual Download

Page: 3 / 67

1 Read these instructions.

2  Keep these instructions.
3  Heed all warnings.
4  Follow all instructions.
5  Do not use this apparatus near water.
6  Clean only with dry cloth.
7  Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any
way, such as cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

•

This equipment should be installed near the socket
outlet and disconnection of the device should be easily
accessible.

•

To completely disconnect from AC mains, disconnect the
power supply cord from the AC receptacle.

•

The mains plug of the power supply shall remain readily
operable.

•

Do not install in a confined space.

•

Do not open the unit – risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not
expressly approved in this manual could void your authority to
operate this equipment.

Service

•

There are no user-serviceable parts inside.

•

All service must be performed by qualified personnel.

Warning!

•

To reduce the risk of fire or electrical shock, do not expose
this equipment to dripping or splashing and ensure that no
objects filled with liquids, such as vases, are placed on the
equipment.

•

This apparatus must be earthed.

•

Use a three wire grounding type line cord like the one
supplied with the product.

•

Be advised that different operating voltages require the use
of different types of line cord and attachment plugs.

•

Check the voltage in your area and use the correct type.
See table below:

Voltage

Line plug according to standard

110-125V

UL817 and CSA C22.2 no 42.

220-230V

CEE 7 page VII, SR section
107-2-D1/IEC 83 page C4.

240V

BS 1363 of 1984.
Specification for 13A fused
plugs and switched and
unswitched socket outlets.

The lightning flash with an arrowhead symbol within
an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in

the literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS