TC Electronic Konnekt 24D, User Manual

65

Digital Inputs and Outputs

Connector (S/PDIF):
Formats (S/PDIF and TosLink) *1) : 
Connector (ADAT® or TosLink) *2): 
Format (ADAT®) *3):
FireWire:
Digital IO Engine:

Clock and Jitter

Internal Sample Rates

External Sample Rates:
Jitter Rejection Engine:
Jitter Rejection Filter:
DIO Interface Jitter:
AD/DA Conversion Jitter:
Digital Output Phase 
(stand alone and across network):
Input Slip Sample Tolerance (all DIs):
Processing Delay DIO @ 96/48 kHz:
Frequency Response DIO:

Line Inputs Ch. 1,2,3,4 *4)

Connectors:
Impedance, Bal/Unbal:
Full Scale Input Level @ 0 dBFS:
THD+N:
SNR:
Freq. Response:
Crosstalk:

ADC

A to D Conversion:
A to D Delay:

Mic. Inputs Ch. 1,2

Connectors:
Sensitivity Full Range Pad on/off:
Total pre-amp gain:
Impedance, Pad on/off:
NF @ Rg = 150 ohm, Max. Gain:
EIN @ Rg = 150 ohm, Max. Gain:
THD+N, Min. Gain:
SNR, Min. Gain:

Inst. Inputs Ch. 1,2

Connectors:
Sensitivity Range:
Total pre-amp gain:
Impedance:
THD+N, Min. Gain:
SNR, Min. Gain:
Crosstalk:

RCA Phono, 75 Ohm
S/PDIF (24 bit), IEC 958, Pro-status bits
Optical Pipe
8-ch. @ 48 kHz, 4-ch. SMUX @ 96 kHz
IEEE 1394a, S400, IEC 61883
TC DICE II, handling all IO formats

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz and 192 kHz
43 to 193 kHz, jitter rejection at all rates
JET™ technology in TC DICE II
< -3 dB @ 10 Hz, < -100 dB @ 600 Hz
< 1 ns peak, BW: 700 Hz to 100 kHz
< 42 ps RMS, BW: 100 Hz to 40 kHz

< 0.5 % of sample period
+50 % to -50 % of sample period
0.15/0.3 ms
DC to 23.9 kHz ± 0.01 dB @ 48 kHz

1/4” Phone Jack (balanced)
20 kOhm/25 kOhm
+13 dBu
< -100 dB (0.001%) @ 1 kHz, -1 dBFS
>111 dB(A), >108 dB, 20 Hz to 20 kHz
+0/-0.5 dB, 20 Hz to 20 kHz
< -100 dB, 20 Hz to 20 kHz

24 bit, 128 x oversampling bitstream
0.68 ms / 0.63 ms @ 44.1 kHz / 48 kHz

Neutrik Combo (XLR)
-10/+10 dBu <> -52/ -32 dBu
62 dB
2000/1300 ohm
< 4 dB
< -127 dBu
< -100 dB (0.001%) @ 1 kHz, -1 dBFS
>109 dB(A), >106 dB, 20 Hz to 20 kHz

Neutrik Combo (1/4” Phone Jack)
-25 dBu <> +17 dBu
42 dB
1 Mohm
< -100 dB (0.001%)  @ 1 kHz, -1 dBFS
>107 dB(A), >104 dB, 20 Hz to 20 kHz
< -100 dB, 20 Hz to 20 kHz

Monitor/Line Outputs Ch. 1,2,3,4 *5) 

Connectors:
Impedance:
Level Range (Ch. 1,2):
Fixed Full Scale Range (Ch. 3,4):
THD+N:
SNR:
Freq. Response:
Crosstalk:

DAC

D to A Conversion:
D to A Delay:

Headphones Output (Ch. 1/2)

Connectors
Impedance
Gain Level Range:

THD+N:
SNR:
Freq. Response:
Crosstalk:

Power @ 40 Ohm Load:
Power @ 600 Ohm Load:

EMC

Complies With:

Safety

Certified To:

Environment

Operating Temperature:
Storage Temperature:
Humidity:

Control Interface

MIDI:
FireWire (DAW):

General

Dimensions:
Weight:
Finish:

PPM Meter (Ch. 1,2):

Power Supply (Included) 

FireWire Bus Powered:

Power Consumption:

Warranty Parts and labor:

1/4” Phone Jack. Ground sensing design.
100 Ohm
-40 dBu <> +12 dBu (analog gain scale)
+12 dBu
< -94 dB (0.002%) @ 1 kHz, -1 dBFS
>111 dB(A), >108 dB, 20 Hz to 20 kHz
+0/-0.1 dB, 20 Hz to 20 kHz
< -100 dB, 20 Hz to 20 kHz

24 bit, 128 x oversampling bitstream
0.70 ms / 0.65 ms @ 44.1 kHz / 48 kHz

2 x 1/4” Phone Jack (Stereo)
80 Ohm
-80 dBu <> +16 dBu @ 300 ohm
(analog gain scale)
< -94 dB (0.002%) @ 1 kHz, -1 dBFS
>103 dB(A), > 100 dB, 20 Hz to 20 kHz
+0/-0.1 dB, 20 Hz to 20 kHz
< -100 dB, 20 Hz to 20 kHz

200mW
93mW

EN 55103-1 and EN 55103-2, FCC part 15,
Class B, CISPR 22, Class B

IEC 60065, EN 60065, UL6500 and CSA
E60065 CSA FILE #LR108093

32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max. 90 %  non-condensing

In/Out: 5 Pin DIN
IEEE 1394a, IEC 61883

9.5" x 1.75" x 9" (241.5 x 44 x 226 mm)
3.3 lb. (1.5 kg)
Acrylic front panel. Plated and coated steel
back plate. Anodized aluminum cover.
3 LED's pr. channel.

12V DC, Adapter for 90 to 240 VAC, 50 to
60 Hz (auto select)

8 to 30 VDC   

<14 W

1 year

APPENDIX - TECHNICAL SPECIFICATIONS

Please note: Technical specifications are subject to change
without notice.

Notes for Konnekt 8 

*1) S/PDIF only
*2) Not available
*3) Not available
*4) Line 1+2 reco AUX 1+2
*5) Two outputs only