TC-Helicon voicelive rack, Basic Manual

13

EN

Basic Operation

To adjust global setup parameters:
1.   Touch the Setup button to enter the Setup menu.
2.   Use the Tab/Step and Navigate arrow buttons to locate param

-

eters then make changes with the Mix knobs.

3.   Touch Home to exit.

Adjusting the Tone settings

The goal of the single Tone button, with its adapting Shape EQ, com

-

pression, de-essing and gate is that adjustment is done automatically. 
If, however, you want to make manual adjustments, they are easy to 
perform.
To change the Tone settings:

1.   Hold the Tone button to reveal its menu in the display.
2.   In the first TONE tab, sing while you make general adjustments 

such as adjusting brightness and bass rolloff via the SHAPE control 
or increasing or reducing compression amount with the COM

-

PRESS control.

3.   Use the Tab/Step arrows to tab over to the individual effects and 

disable the ADAPTIVE parameter if desired. This will reveal ad

-

ditional manual adjustment settings.

Preset chaining with the Step feature

Each preset can consist of up to 10 steps that you can step through 
using the Tab/Step arrow buttons or a footswitch. Steps can be edits of 
the starting preset or other presets copied into the slots.

•   Voices - Combined level of the Harmony and Doubling voices.
•   Delay/Reverb - Combined level of the Delay and Reverb effects.
•   Guitar - If a guitar is connected to the Guitar input and no Guitar 

Thru connection is made, this control varies the level of the guitar 
in the main output mix.

•   Output - Adjusts the overall output level to the main outputs and 

the Headphone output. 

Adjusting the Guitar features

The Guitar input has its own Reverb and µMod processors, 3 band EQ 
and compressor. As long as the Guitar Thru has no jack inserted, the gui

-

tar will be routed to the main output mix with these effects added. 

To adjust the Guitar effects:
1.   Touch the Setup button.
2.   Use the Tab/Step arrow buttons to navigate to the GUITAR tab.
3.   Select and adjust parameters within the GUITAR tab using the 

Navigate arrows and the Mix knobs.

All changes are recalled automatically the next time the unit is powered.

Phantom, Mono, MIDI etc. - the Setup menu

Global parameters are adjusted in the Setup menu. Changes made in 
this menu are automatically stored as they are made. Note that some 
settings of parameters such as DIGITAL IN and LEAD MUTE can result 
in unexpected sound (or lack thereof) from the unit. Consult the Details 
manual before adjusting these.