TXP Inst. & Maint. Manual: IM-825
21
the electrical energy. It is further
driven by the airflow of the other
fans. There is a risk of injury due to
rotating parts!
•
Small particles or dirt dissolve dur-
ing work on the fan and become
projectiles due to the remaining air
flow. You can injure other fans,
plant parts, or people at the outlet
opening.
Therefore, when working on systems
with multiple fans, turn off all fans. If this
is not possible, disconnect the affected
fan from the system by blocking the suc-
tion and/or pressure side before per-
forming any work. After completion of
the work, thoroughly check the fan and
remove any loose objects and dirt be-
fore removing the blockages and re-en-
tering the fan into plant operation.
2.8 Safety and surveillance
equipment
2.8.1 General
The safety devices on the product are
designed to protect personnel from haz-
ards caused by the product, which has
been built in accordance with applicable
legal regulations and is safe to operate.
Dangerous hazards that cannot be ruled
out are provided with protective devices
and, if necessary, are marked with
warning signs on the product and in-
structions for occupational safety in the
operating instructions.
The product may only be operated if all
safety and safety-related equipment is in
place and functional.
DANGER!
Danger from disassembly
or manipulation of and on
safety devices
Dismantling or manipulating
and manipulating safety de-
vices can result in serious ir-
reversible or even life-threat-
ening injuries, even fatalities,
serious adverse effects on
health or significant damage
to property.
Do not dismantle
safety devices
Do not tamper with
safety devices
Check all existing
safety devices at regu-
lar intervals
WARNING!
Risk of accident due to
missing or defective safety
devices
Injury can occur if arbitrary
changes are made to the
safety devices.
Check the protective
devices for functions
before operation and
replace defective
safety devices
Do not change safety
devices