11
7. Place the lid back on the coffee
bean compartment. Press the lid
all the way on so that the aroma
protection seal can optimally
protect the aroma of the coffee
beans.
8. Plug the connection plug into
the back of the machine.
9. Insert the mains plug into an
easily accessible wall socket.
10. Press the On/Off button to
switch on the machine.
The coffee buttons will flash
and the machine will begin
to heat up.
The pump starts after a few seconds. A small amount of water is flushed through
the system and dispensed into the drip tray.
The machine is ready for use
as soon as all the buttons are
lit up continuously.
Adjusting the height of the coffee spout
You can adjust the height of the coffee spout to match the size of the cup.
For espresso cups, slide
the coffee spout down.
For large cups, slide
the coffee spout up.
For tall glasses, slide
the coffee spout up
as far as it will go and
remove the drip tray.
11. Pour out the water in the drip
tray if necessary.