13
5. Empty the leftover water tray,
the container for the coffee
grounds and the drip tray
regularly:
Remove the drip tray.
Pull out the leftover water
tray along with the container
for the coffee grounds.
6. Empty the container for the
coffee grounds, the leftover
water tray and the drip tray
as necessary.
7. Then reinsert all parts into
the machine.
Preheating the cup
Fill the cup with hot water and then pour it away shortly before using the cup.
This will help your espresso or caffè crema taste their best.
The hot water that is dispensed is only suitable for heating the cup.
It is NOT suitable for making tea or other instant beverages!
1. Place an empty cup under
the frother nozzle.
2.
Press and hold
the steam
button until...
... the symbol for
“Hot water” is shown
continuously in the top
section of the display.
3. Briefly press the steam button
once. The LED ring on the steam
wand will light up. Hot water will
run into the cup below.
4. As soon as the required amount
of water has run into the cup,
press the steam button again
to stop the flow of water.
If you do not press the steam
button again, the machine will
stop dispensing hot water
automatically after approx.
250 ml.
5. Pour the water away.
The process for preheating the cup is complete. You can now make your coffee.