15
If you do not press the steam button again, it will stop automatically after
approx. 90 seconds. The milk froth is now ready to use. You can make your
coffee right away.
Cleaning the frother nozzle
Do not wait too long before cleaning the steam wand and frother nozzle. lt will
be difficult to remove any residues later on (see chapter titled “Cleaning”).
Double beverage amount
If you wish to double the
beverage amount (espresso
approx. 80 ml or caffè crema
approx. 250 ml), press the “2x”
button first before pressing
the coffee button.
If you wish to make the coffee stronger, press the “Intense
+
” button in
addition to the “2x” button before you press one of the coffee buttons
to start making coffee.
WARNING
- risk of burns due to hot machine parts
Steam wand and frother nozzle remain hot after use.
•
Do not touch them with your bare hands. Always wear
oven gloves or something similar.
m
Adjusting the strength of the coffee -
Intense
+
technology
If you wish to make the coffee
stronger, press the “Intense
+
”
button first before pressing one
of the coffee buttons. The coffee
will then be made using more
beans.
If you wish to double the beverage amount, press the “2x” button in
addition to the “Intense
+
” button before you press one of the coffee
buttons to start making coffee.
Adjusting the amount of beverage
You can change the default settings for the amount of beverage permanently.
You can customise the setting for each coffee button: one setting each for
espresso and caffè crema.
Espresso and Caffè Crema
1. Press the coffee button of your
choice (e.g. Caffè Crema) to
start the grinding and brewing
process.
2. Wait until the beans have
been ground.
m
Default settings upon purchasing the machine:
espresso
approx. 40 ml –
caffè crema
approx. 125 ml
The water quantity can be set between approx. 25 and 250 ml.
