24
During a long period of non-use
If you will not be using the machine for a longer period of time, e.g. when you go
on holiday, we recommend for reasons of hygiene that you clean the machine as
described in the “Cleaning” chapter and empty all the water out of the machine’s
pipes. Proceed as follows:
1. Make sure that the drip tray
is pushed fully into the machine
and that the frother nozzle
is pointing downwards as
illustrated.
2. Press the On/Off button
to switch on the machine.
3. Wait until the machine heats
up and all buttons light up
continuously.
4. At the same time, press and hold
both the On/Off button and the
Caffè Crema button for approx.
5 seconds until you hear 2 beeps.
5. Release the buttons.
The “Refill water”
symbol will light up.
6. Remove the water tank from
the machine.
The pump transports the
remaining water out of the
pipes of the machine. It stops
automatically as soon as
there is no more water inside.
The leftover water is caught
in the drip tray.
Afterwards, the machine will automatically switch to standby mode.
When you wish to use the machine again at a later time, proceed as described
in the chapter titled “Initial operation – prior to first use”.
Problems / solutions
The “Refill water” symbol is lit up.
Is the water tank empty?
Fill the water tank with fresh water and reinsert it into the machine.
The pump starts automatically and continues with the brewing process.
Was the water tank pulled out of the machine during the brewing
process?
This will immediately stop the brewing process. Reinsert the water tank
into
the machine.
The “Refill beans” symbol is lit up.
Is the coffee bean compartment empty?
Pour beans into the coffee bean compartment. The coffee beans will
automatically be pulled into the grinder and ground during the next
grinding/brewing process.
