5
If the connection cable of this machine becomes damaged,
•
it must be replaced by the manufacturer, its customer
service or a similarly qualified person in order to avoid
danger.
Remove the mains plug from the wall socket...
•
... if a malfunction occurs,
... if the machine will not be used for any length of time,
... before cleaning the machine.
Always pull on the plug, not the connection cable.
To disconnect the machine from the mains completely,
•
remove the mains plug from the wall socket.
WARNING – fire hazard
Position the machine in such a way that it is free-standing
•
for use; never place it directly against a wall, in a corner,
in a cupboard, against curtains, etc.
WARNING – health hazards
Empty and clean the leftover water tray, the container
•
for the coffee grounds and the drip tray regularly.
If you will not be using the machine for a prolonged period,
•
empty the water tank, coffee bean compartment, drip tray
and container for the coffee grounds.
Change the water in the water tank daily to prevent germs
•
from collecting.
Use only the cleaning and descaling agents listed in these
•
instructions as well as the relevant cleaning utensils to
clean the machine. The use of other cleaning agents can
lead to health hazards.
WARNING – risk of scalds/burns
Hot steam and hot water can cause scalding. Never expose
•
any part of the body to the steam or hot water jet. Do not
touch any hot parts of the machine, such as
the steam
wand or the metal on the frother nozzle
. Only use the
steam/froth functions when a suitable, heat-resistant
container has been placed under the frother nozzle.
Do not touch the coffee spout during or immediately
•
after use. Avoid contact with coffee or hot water being
dispensed from the spout.
The brewing unit becomes hot when preparing beverages.
•
Do not remove the brewing unit during or shortly after use.
The surfaces of the heating element stay warm after use.
•
If there is too little water in the tank while the machine is
•
brewing coffee, the machine will stop the brewing process.
The brewing process will automatically resume once the
water tank has been filled and reinserted in the machine.
