11
Initial operation – prior to first use
1. Place the machine ...
... on a level worktop or surface that is not sensitive to moisture.
... close to a wall socket. The length of the connecting cord
is approx. 31.5 in. (80 cm).
... at a distance of at least 39.4 in. (1 m) to hot, flammable surfaces
(hobs, ovens, heaters, etc.).
... at least 5.9 in. (150 mm) away from walls.
150 mm
150 mm
150 mm
The figure shows the drip bowl with drip grid to illustrate the real space
requirement. Observe this for the machine installation location.
The machine must not be carried by the drip bowl.
2. Push the drip bowl and drip grid
all the way into the machine as
illustrated.
The drip bowl is held in place by
magnets.
3. Pull the water tank up and out of
the machine.
4. Fill the water tank with fresh,
cold tap water or drinking water
up to the MAX mark.
NOTICE: Never fill water
directly into the tank while
the water tank is still in the
machine! Otherwise, the
machine could be damaged
.
109547 en Kaffeevollautomat_USA_v4.indd 11
109547 en Kaffeevollautomat_USA_v4.indd 11
31.08.22 09:46
31.08.22 09:46