12
8. Place the lid back on the coffee
bean compartment.
Press the lid all the way on so that
the aroma protection seal can
optimally protect the aroma of the
coffee beans.
9. Plug the connecting plug into the
back of the machine.
10. Insert the mains plug into an
easily accessible wall socket.
11. Press the on/off switch to switch
on the machine.
The rinsing/hot water button flashes
and the heating up process starts.
The pump starts after a few seconds. A small amount of water is flushed through
the system and dispensed into the drip bowl.
CAUTION
- Risk of burns from hot liquids
Hot water or coffee from the coffee spout may cause burns.
• Do not touch the coffee spout during and shortly after use of the machine.
5. Reinsert the water tank in the
machine and push it down as far
as it will go.
6. Remove the lid from the coffee
bean compartment.
7. Fill as many coffee beans into the
coffee bean compartment as you
will need for one day.
Approx. 5.6 oz. (160 g) fits into
the coffee bean compartment.
The coffee bean compartment
can also be extended to hold
a capacity of approx. 10.6 oz.
(300 g) (see the “Expansion for
the coffee bean compartment”
chapter).
109547 en Kaffeevollautomat_USA_v4.indd 12
109547 en Kaffeevollautomat_USA_v4.indd 12
31.08.22 09:47
31.08.22 09:47