6
1. Make sure that the used capsule
container is correctly inserted
into the front drawer. The front
drawer needs to be pushed in all
the way and the drip tray
correctly inserted.
2. Fill the water tank up to
the
MAX
mark with fresh,
cold tap/drinking water.
- Open the flap in the top of the
water tank and pour in the water
through the filling inlet, or ...
- ... pull the water tank straight up
and out of the machine and then
fill it with water.
When you reinsert the water tank
into the machine, push it down
as far as it will go.
3. The lever must be folded down.
Fold it down if necessary.
4. Place an empty cup underneath
the spout.
5. Connect the mains plug to an
easily accessible wall socket.
6. Press one of the 3 beverage
buttons to switch on the
machine.
You will hear a brief beeping
sound.
Initial operation — prior to first use
