19
Adjusting the strength of the coffee
Adjust the strength of the coffee to suit your personal
taste by adjusting the quantity of water.
Adjusting the strength for the current brewing
procedure (without saving the setting)
If the coffee is too weak, you can stop the water flow by
pressing the flashing coffee selection button.
If the coffee is too strong, start the brewing procedure
again without inserting a new capsule.
Press the flashing coffee selection button as soon as
sufficient water has run through.
Setting the strength permanently (saving the setting)
The factory settings for the water quantities used by the
machine per capsule can be changed. This enables you to
make a stronger or weaker brew of your favourite coffee.
Please note that only
one
individual setting is possible for
each coffee type.
Default setting when the machine is bought:
filter coffee:
125 ml
caffè crema:
125 ml
espresso:
40 ml
You can adjust the beverage quantity in the range of
30 — 300 ml.
1.
Proceed as you would do for brewing coffee: insert a
capsule, press the stop lever down, place a cup under-
neath.
2. As soon as all the buttons remain permanently lit,
press the corresponding coffee selection button
(depending on the capsule inserted) and keep the
button pressed down.
3. Release the button as soon as the desired quantity has
been dispensed into the cup. The chosen quantity will
be stored.
4. If the setting is not to your taste, simply repeat the
procedure to change it again.
Restoring the factory settings
After you have changed the quantity for one or more
beverages, you can restore the original water quantities
as follows:
1.
Press the On/Off button
to switch the machine off.
2.
Press and hold the left and right
coffee selection buttons and
switch the machine on by pressing
the On/Off button
.
3. Release the buttons.
The factory settings have been restored.
m
m
Adjusting the strength of the coffee
Summary of Contents for Cafissimo CLASSIC
Page 43: ...68314 GSMOHB 042015 D006F ...